请输入您要查询的单词:
国际大辞典收录了835600条英语、德语、日语等多语种在线翻译词条,基本涵盖了全部常用单词及词组的翻译及用法,是外语学习的有利工具。
临界开挖高度{土} critical height;
临界强度 critical intensity;
临界态 critical state;
临界性 criticality;
临界性质 {物化} critical properties;
临界截面 {流} critical cross-section; choking section;
临界扭曲应力 critical buckling stress;
临界扭转速度 critical torsional speed;
临界抗张应力 critical tensile stress;
临界折射 critical refraction;
临界指数 {热} critical exponent; criticality index;
临界损坏 critical damage;
临界损失 critical loss;
临界推移力 critical tractive force;
临界操作 critical operation;
临界放大系数 critical magnification factor;
临界效应 critical effect; threshold effect;
临界数 critical number;
临界方程 {核} critical equation;
临界昏暗 limb darkening;
临界昼长 critical day length;
临界智力落后 {心理} borderline mental retardation;
临界暗期 critical dark period;
临界曲率值 critical value for buckling;
临界最大值 critical maximum
临界杀菌浓度 critical killing dilution;
临界条件 critical condition;
临界极限 critical limit;
临界栅压曲线 critical-grid-voltage curve;
临界栅压 {电子} critical grid voltage; firing point;
临界栅极电流 {电子} critical grid current;
临界检测 marginal test;
临界概率 critical probability;
临界比 {统} critical ratio;
临界气饱和度 gas critical saturation;
临界水分 {化工} critical moisture content;
临界水力陡度 {流} critical hydraulic gradient;
临界法向应力 critical normal stress;
临界波长 critical wavelength;
临界流动 critical flow;
临界流动参数 critical parameter of flow;
临界流态化 critical fluidization;
临界流量 critical flow;
临界流量计 {油工} critical flow prover;
临界浓度 critical concentration;
临界淬火 critical hardening;
临界淬火速度 critical quenching rate;
临界淬硬温度 critical hardening temperature;
临界温度 critical temperature;
临界温度差 critical temperature difference;
临界温度热敏电阻器 critesistor; critical temperature thermistor;
临界温度电阻器 critical temperature resistor;
临界温度系数热敏电阻器 critical temperature coefficient thermistor;
临界温度范围 critical temperature range;
临界湿度 {化工} critical humidity;
临界溶度 critical solubility;
临界溶解[液]温度 critical solution temperature;
临界点
临界点位移 stagnation point movement
临界点偏移 stagnation point shift;
临界点剩余压力 stagnation overpressure;
临界点热力学 thermodynamics of critical point;
临界热 critical heat;
临界热流 critical heat flux;
临界热负荷 critical thermal load;
临界热通量 critical heat flux;
临界照度 B. C. D. (between comfort and discomfort);
临界熔点 critical solution point;
临界状态 criticality; critical state; critical behaviour;
临界现象 {物化} critical phenomena;
临界球 critical sphere;
临界瑞利数 critical Rayleigh number;
临界电位 critical potential;
临界电势 critical potential;
临界电压 critical voltage; cut-in voltage; cutoff voltage; critical pressure;
临界电压差 critical voltage difference;
临界电晕电压 {电工} critical corona voltage;
临界电流 {固物} critical current;
临界电流密度 {物化} critical current density;
临界电路 critical circuit;
临界电通量密度 critical dielectric flux density;
临界电阻 critical resistance;
临界硬化 {冶} critical hardening;
临界硬度 {冶} critical hardness;
临界磁场 critical magnetic field; threshold field; critical field;
临界磁通密度 critical magnetic flux density;
临界稳定性 critical stability; marginal stability;
临界等温线 critical isotherm;
临界粘性衰减 critical viscous damping;
临界精神病 {心理} borderline psychosis;
临界系数{化} critical coefficient;
临界级 critical level;
临界线 {物化} critical line; critical locus;
临界综合症 {心理} borderline syndrome;
临界缠结分子量 critical entanglement molecular weight;
临界缺点 critical defect;
临界耐电压 critical withstand voltage;
临界耦合 {电工} critical coupling; optimum coupling;
临界耦合系数 critical coupling coefficient;
临界胶团浓度 {物化} critical micelle concentration;
临界自励磁 critical self-excitation;
临界节点 critical node;
临界范围 {冶} critical range; critical interval;
临界融合频率 critical fusion frequency;
临界表面压力 critical surface pressure;
临界裂缝扩展力 critical crack extension force;
临界装置 {核} critical assembly;
临界角 {光} critical angle; angle of nonslip point;
临界试验 {电子} marginal test; critical experiment;
临界误差 critical error;
临界误差角 critical error angle;
临界负载 critical load;
临界负载电流 critical load current;
临界质量 {核} critical mass;
临界质量比 critical mass-ratio;
临界赤道速度 critical equatorial velocity;
临界距离 critical distance;
临界转数 critical revolutions;
临界转速 {机} critical speed; critical speed of revolution;
临界载荷 critical load;
[首页]
[上一页]
[3922]
[3923]
[3924]
[3925]
[3926]
[3927]
[3928]
[下一页]
[末页]
共有 835600 条记录 页次: 3925/6964
Copyright © 2004-2023 idict.net All Rights Reserved